Resistant ceramic composite pipe has excellent abrasion resistance, heat resistance, mechanical and thermal shock resistance , easy soldering and mounting , especially for wear, erosion serious
material handling applications, such as coal-fired power generation, metallurgy , coal , mining, geology pipeline transportation of materials and other industries.
1. Manufacturing Process of Bimetal Clad Pipe and Bend:
Bimetal Clad Pipe and Bend are cast with mold vanishing vacuum suction casting
cladding process. Outer of straight pipe is common steel pipe, cladding realized by forming high chromium lining via centrifugal forming technique. Outer of bend uses hot-bending bend and lining
is cast with high-chromium cast iron. Bends and other profile sections can be cladded in whole and this process has changed the traditional practice to fabricate bend and other profile sections
by drawing polyline without changing flow pattern of material inside piping,greatly reducing conveyance resistance of material.
2. Advantages Compared with Traditional Wear Resistant
Alloy Cast Iron, Alloy Cast Steel, General Clad Steel Pipe and Cast Stone Pipe:
1. Good wear-resistance, giving full play to wear-resistance of high chromium cast iron.
2. Withstanding high pressure:
Bimetal cladding pipe and bend can be used for any pressure rating. Close bonding of outer and lining by adopting special process make cladding interlayer molten-joint to ensure reliable operation.
3. Good mechanical impact and thermal impact resistance property.
4. Convenient in connection for installation:
Bimetal cladding pipe and bend can be cut and welded as you like.
1. Good wear-resistance, giving full play to wear-resistance of high chromium cast iron.
2. Withstanding high pressure:
Bimetal cladding pipe and bend can be used for any pressure rating. Close bonding of outer and lining by adopting special process make cladding interlayer molten-joint to ensure reliable operation.
3. Good mechanical impact and thermal impact resistance property.
4. Convenient in connection for installation:
Bimetal cladding pipe and bend can be cut and welded as you like.
3. Physical Properties of Bimetal Clad Pipe and Bend:
Welcome to order more.
Note:
This inventory is part of the inventory, demand and other models in stock or order materials, please contact us.
This inventory is part of the inventory, demand and other models in stock or order materials, please contact us.
Flexure Strength |
Tensile Strength |
Elongation |
Cross Section Stretch Ratio |
Impact Toughness |
Hardness of Wearable Layer |
Hydrostatic Testing Pressure |
MN/㎡
|
MN/㎡
|
%
|
%
|
J/c㎡
|
HRC
|
Mpa
|
>610 | >700 | 5 | 5.1 | >15 | >38 | 5.6-12.9 |
Multiple composite pipe Multiple composite pipe, and current domestic ordinary ceramic composite pipe except that the inner wall of multi-layer ceramic polymer materials with excellent wear resistance |
UHMWPE wear pipe Ultra-high molecular weight polyethylene (UHMWPE) is a new kind of engineering thermoplastics with more than 3 million viscosity-average molecular weight. |
Wear-resistant Alloy Composite Y-type Tee |
Wear-resistant Alloy Composite 90 degree bend |
Bi-metal Clad Pipe and Bend are cast with mold vanishing vacuum suction casting cladding process. |
Ultra-high molecular weight polyethylene plastic composite pipe |
Multi-resistant ceramic lined composite pipe |
Wear-resistant Alloy Composite Pipe Tee |
Wear-resistant Alloy Composite Pipe |
Nang embedded ceramic wear elbow |
Bimetal Cladding Steel Pipe |
To be informed of the latest articles, subscribe: